Máy cắt ống, Ống thông gió

Sự khác biệt giữa ống dẫn TDF và ống dẫn góc

Sự khác biệt giữa ống dẫn TDF và ống dẫn góc

TDF Duct And Angle Duct

TDF Duct And Angle Duct During the construction of the ventilation air duct. The connection mode of the ventilation duct will determine according to various factors. Such as the aging of the project, the material, and the thickness of the ventilation duct. The project funds, and so on.

In this way, during production before installation, determine how to process and produce ventilation pipes, and determine what kinds of ventilation pipe production machinery to purchase, step by step, step by step, improve the production order, and then speed up the progress of the site project. TDF Duct And Angle Duct

Galvanized steel sheet ventilation pipes can divide into flanged connections and non-flanged connections. Angle iron flange ventilation pipe is the flange of galvanized steel plate ventilation pipe, which is angle iron. It is a kind of ventilation pipe connection. Generally, large ventilation pipes have flanges and small air pipes have no flanges. The common plate flange ventilation pipe has another name, a non-flange ventilation pipe. Its manufacturing form is faster than the traditional rectangular ventilation pipe. TDF Duct And Angle Duct

ống dẫn khí

Ưu điểm của Ống dẫn khí bằng thép tấm mạ kẽm

  • Good fireproof performance is also one of the reasons why galvanized air duct can widely use in engineering. TDF Duct And Angle Duct
  • The products can mostly use in the fire-fighting systems of large shopping malls, office buildings, subway stations, large supermarkets and modern chemical plants. People have higher and higher requirements for the quality of life and environment. When building construction and some factories will consider whether the ventilation system is good, and plant some green plants at home, Good ventilation also needs to ensure the vigorous growth of plants. TDF Duct And Angle Duct
  • The galvanized air duct has smooth inner wall, low resistance, low ventilation loss, reduced energy consumption, saved operation cost, good air tightness and tightness, and high bearing and compressive strength. TDF Duct And Angle Duct
  • The galvanized air duct has the advantages of simple installation, convenient on-site manufacturing and close cooperation with civil engineering, and can be suitable for very complex purification and ventilation projects. TDF Duct And Angle Duct

Khi lắp đặt đường ống thông gió, mặt bích tấm thông thường hoặc mặt bích thép góc sẽ sử dụng để thông gió tốt hơn. Sự khác biệt giữa ống gió mặt bích tấm thông thường và mặt bích thép góc là gì?

Sự khác biệt giữa ống TDF và ống thép góc

  • When manufacturing the common plate flange, it shares a block plate with the air duct and also connect with the air duct. It is machine, which saves money and trouble, and has strong integrity. TDF Duct And Angle Duct
  • Chi phí sản xuất mặt bích thép góc tương đối cao. Nó độc lập với ống dẫn khí. Và nó cũng nên cài đặt riêng trong quá trình sản xuất. Nó gây rắc rối trong quá trình xử lý, và hiệu quả xử lý sẽ thấp hơn, nhưng nó có độ cứng vững.
angle steel ducts

Ưu điểm của ống mặt bích thép góc

  • The raw materials that in the production of angle steel flange air duct are galvanized steel plate. During the processing, machines and equipment such as multifunctional biting machine, biting function equipment and angle steel production line will use to process and shape it, so as to improve its durability. Moreover, in the production, mechanized production mode is adopted, so that the manufacturing speed is relatively fast, The processing size is also relatively accurate and the processing efficiency is still high. It is often processed temporarily at the construction site. TDF Duct And Angle Duct
  • The shape of angle steel flange air duct is relatively simple and generous, and the most important thing is good sealing. There will be no air leakage in use. During installation, too many bolts are not required, and the weight is relatively light, which is also convenient for installation. This can not only improve the installation efficiency, but also save a lot of installation costs. TDF Duct And Angle Duct
  • When making an angle iron flange air duct, it will not produce too much dust, no noise pollution, and no harm to the environment and health. In addition, the angle iron flange has good durability, long service time and simple maintenance. TDF Duct And Angle Duct

Ưu điểm của ống dẫn mặt bích thông thường

  • Trong sản xuất ống gió mặt bích tấm thông thường, nguyên liệu được sử dụng là thép tấm mạ kẽm. Trong quá trình gia công, máy sản xuất mặt bích tấm thông thường và dây chuyền sản xuất ống dẫn khí, trực tiếp xử lý và tạo hình nó, thường được sử dụng để làm cho độ bền của nó tốt hơn. Đối với sản xuất, tốt nhất nên áp dụng phương thức sản xuất hoàn toàn tự động và cơ giới hóa, chẳng hạn như năm dây chuyền sản xuất ống gió. Bằng cách này, tốc độ sản xuất tương đối nhanh, kích thước gia công tương đối chính xác, hiệu suất gia công cũng cao, thường gia công tạm thời trên công trường.
  • The common flange air duct pays attention to high efficiency, and the most important sealing is not poor. There is often no air leakage in use. During installation, you only need to use the buckle made by the common plate flange machine to fasten. Which is particularly convenient and time-saving, and the weight is relatively light. It is also convenient for installation. Which can not only improve the installation efficiency but also save a lot of installation costs. TDF Duct And Angle Duct
  • Khi làm ống gió mặt bích chung. Nó sẽ không tạo ra quá nhiều bụi, không gây ô nhiễm tiếng ồn, cũng như không gây hại cho môi trường và sức khỏe.
  • In addition, the durability of the common flange air duct is also relatively good. The service time is still long, and the maintenance is relatively simple. TDF Duct And Angle Duct
lắp đặt ống gió

Sản xuất và lắp đặt Ống dẫn khí mặt bích thông thường

Mối liên hệ giữa the ống dẫn khí mặt bích tấm chung uses the flange buckle produced by the common plate flange machine, which is made of slightly thicker galvanized steel plates. After being formed by the flange clamp forming machine, it is cut into a unified size for installation and connection. TDF Duct And Angle Duct

The manufacturing steps of the common flange air duct are divided into three steps. In the first step, the standard straight pipe is directly pressed into an integral flange from the air duct production line. For the second step, after blanking of non-standard straight pipe, elbow, tee, cross, and accessories, TDF flange forming is completed on a single piece of equipment. In the third step, the four right angles of the common plate flange are directly stamped by the die and can be clamped at the four corners during installation. TDF Duct And Angle Duct

Because the common plate flange is integrated with the pipe steel plate, it is not necessary to punch and rivet like an angle steel flange. A special flange clamp is used for the connection of two pipes, and the four corners plus a 90-degree flange angle are connected with bolts. It has the advantages of simple operation, improved efficiency, flat and smooth appearance, accurate size, strong interchangeability, and stable product quality. TDF Duct And Angle Duct

The production equipment of the common plate flange air duct is mainly around the common plate flange machine, and other equipment can be equipped with some blanking machines and equipment for folding the ventilation duct. TDF Duct And Angle Duct

TDF flange machine

Sản xuất và lắp đặt ống dẫn khí mặt bích sắt góc

Các bước sản xuất của ống gió mặt bích thép góc có thể chia thành bốn bước. Bước đầu tiên là vật liệu sắt góc thấp hơn và vật liệu ống gió dưới. Bước thứ hai là đục lỗ sắt góc. Bước thứ ba là hàn sắt góc. Bước 4: khoan lỗ bắt vít và đóng đinh tán ống gió và sắt góc.

Mặt bích sắt góc được chế tạo theo quy trình trên vẫn có vấn đề là khả năng thay thế kém. Các hiện tượng bao gồm: mặt bích không bằng phẳng, mặt bích hình chữ nhật không trùng với lỗ vít mặt bích cùng quy cách sau khi quay 180 độ, kích thước bên trong hoặc kích thước của hai đường chéo không bằng nhau, vượt quá sai lệch cho phép, v.v. ., ảnh hưởng đến việc lắp ráp bình thường của các bộ phận ống gió trên công trường. Sửa đổi và khoan không cần thiết trong quá trình lắp đặt do sai lệch nhỏ; Sự sai lệch quá mức gây ra sự làm lại và lãng phí.

Thiết bị sản xuất của ống gió mặt bích sắt góc chủ yếu xoay quanh máy cắn đa năng và các loại máy cắt, thiết bị gấp ống thông gió.

PITTSBURGH  lock former

Hiện tại, để sản xuất ống thông gió mặt bích tấm thông thường và ống thông gió mặt bích sắt góc, xem xét việc cải thiện hiệu suất và hiệu quả công việc, a thiết bị sản xuất ống dẫn khí năm dòng bao gồm máy liên kết máy kép và máy liên kết máy kép máy mặt bích tấm thông thường đã được phát triển.

Dây chuyền sản xuất ống gió thứ năm có ưu điểm là chiếm diện tích đất nhỏ gọn và mức độ sản xuất tự động cao. Chỉ cần cung cấp vật liệu cuộn với độ dày tương ứng và gửi đến nơi cấp liệu của dây chuyền sản xuất để sản xuất tấm phẳng theo yêu cầu, phụ tùng hình chữ L hoặc ống vuông hoàn chỉnh ống dẫn khí mặt bích tấm thông thường và ống dẫn khí mặt bích sắt góc .

Do mức độ tự động hóa cao, cấu hình tiên tiến và tỷ lệ hỏng hóc thấp, hiện nay trong ngành sản xuất ống thông gió, sự phụ thuộc vào năm dây chuyền sản xuất ống thông gió hoàn toàn tự động ngày càng cao. Năng suất sản xuất trung bình của một ca có thể lên đến 2000 mét vuông mỗi ca, điều đó có nghĩa là không còn cần phải lựa chọn và kết hợp nhiều máy khác nhau để sản xuất ống dẫn khí. Giờ đây, một máy có thể tạo thành các ống dẫn khí cùng một lúc và hiệu quả đã được cải thiện rất nhiều.

duct line 5

Tóm lại, dù ống thông gió được cấu tạo như thế nào. Việc lựa chọn ống gió TDF hoặc ống mặt bích sắt góc, sẽ không ảnh hưởng đến việc cải thiện dần các yêu cầu công nghiệp đối với ống thông gió. Cho dù đó là chất lượng hay các đặc tính khác nhau, chẳng hạn như cách nhiệt, độ kín khí, v.v. Hoặc công nghệ xử lý ống thông gió sẽ có yêu cầu cao hơn.

Đối với ống gió mặt bích tấm thường và ống gió mặt bích sắt góc. Sự khác biệt lớn nhất là nâng cao hiệu quả, và lựa chọn phương pháp xử lý thích hợp là cách duy nhất để nâng cao hiệu quả.

2 suy nghĩ về “Sự khác biệt giữa ống dẫn TDF và ống dẫn góc

  1. Avatar of Meppo Solan Meppo Solan viết:

    Xin cho tôi hỏi làm ống gió thép góc như thế nào, máy nào nên coi, xin chỉ dẫn giúp. Cảm ơn!

    1. Avatar của Simon Simon viết:

      Xin chào Meppo,
      Máy làm ống gió thép góc cần có các loại dưới đây: Máy tạo ống gió 3, máy tạo khóa Pittsburgh, dây chuyền sản xuất sắt góc, máy gấp bằng tay hoặc khí nén.
      Nếu có thể, tôi đề xuất máy ống gió dòng 5 để làm ống dẫn khí trong một bước. Tôi hy vọng tin nhắn này có thể giúp bạn.

Để lại một bình luận

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *