آلة مجاري الهواء, التهوية لاصق

الفرق بين قناة TDF وقناة الزاوية

الفرق بين قناة TDF وقناة الزاوية

TDF Duct And Angle Duct

TDF Duct And Angle Duct During the construction of the ventilation air duct. The connection mode of the ventilation duct will determine according to various factors. Such as the aging of the project, the material, and the thickness of the ventilation duct. The project funds, and so on.

In this way, during production before installation, determine how to process and produce ventilation pipes, and determine what kinds of ventilation pipe production machinery to purchase, step by step, step by step, improve the production order, and then speed up the progress of the site project. TDF Duct And Angle Duct

Galvanized steel sheet ventilation pipes can divide into flanged connections and non-flanged connections. Angle iron flange ventilation pipe is the flange of galvanized steel plate ventilation pipe, which is angle iron. It is a kind of ventilation pipe connection. Generally, large ventilation pipes have flanges and small air pipes have no flanges. The common plate flange ventilation pipe has another name, a non-flange ventilation pipe. Its manufacturing form is faster than the traditional rectangular ventilation pipe. TDF Duct And Angle Duct

أنابيب الهواء

مزايا مجاري الهواء المصنوعة من الألواح الفولاذية المجلفنة

  • Good fireproof performance is also one of the reasons why galvanized air duct can widely use in engineering. TDF Duct And Angle Duct
  • The products can mostly use in the fire-fighting systems of large shopping malls, office buildings, subway stations, large supermarkets and modern chemical plants. People have higher and higher requirements for the quality of life and environment. When building construction and some factories will consider whether the ventilation system is good, and plant some green plants at home, Good ventilation also needs to ensure the vigorous growth of plants. TDF Duct And Angle Duct
  • The galvanized air duct has smooth inner wall, low resistance, low ventilation loss, reduced energy consumption, saved operation cost, good air tightness and tightness, and high bearing and compressive strength. TDF Duct And Angle Duct
  • The galvanized air duct has the advantages of simple installation, convenient on-site manufacturing and close cooperation with civil engineering, and can be suitable for very complex purification and ventilation projects. TDF Duct And Angle Duct

عند تثبيت أنبوب التهوية ، ستستخدم شفة لوحة مشتركة أو شفة فولاذية بزاوية لتحسين التهوية. ما هو الفرق بين مجرى هواء شفة الصفيحة المشتركة وشفة فولاذية الزاوية؟

الفرق بين قناة TDF وقناة الصلب الزاوية

  • When manufacturing the common plate flange, it shares a block plate with the air duct and also connect with the air duct. It is machine, which saves money and trouble, and has strong integrity. TDF Duct And Angle Duct
  • تكلفة تصنيع حافة الأنبوبة الفولاذية عالية نسبيًا. إنها مستقلة عن مجرى الهواء. ويجب أيضًا تثبيته بشكل منفصل أثناء الإنتاج. إنه أمر مزعج في المعالجة ، وستكون كفاءة المعالجة أقل ، لكنها تتمتع بصلابة قوية.
مجاري الهواء الزاوية

مزايا مجرى شفة زاوية الصلب

  • The raw materials that in the production of angle steel flange air duct are galvanized steel plate. During the processing, machines and equipment such as multifunctional biting machine, biting function equipment and angle steel production line will use to process and shape it, so as to improve its durability. Moreover, in the production, mechanized production mode is adopted, so that the manufacturing speed is relatively fast, The processing size is also relatively accurate and the processing efficiency is still high. It is often processed temporarily at the construction site. TDF Duct And Angle Duct
  • The shape of angle steel flange air duct is relatively simple and generous, and the most important thing is good sealing. There will be no air leakage in use. During installation, too many bolts are not required, and the weight is relatively light, which is also convenient for installation. This can not only improve the installation efficiency, but also save a lot of installation costs. TDF Duct And Angle Duct
  • When making an angle iron flange air duct, it will not produce too much dust, no noise pollution, and no harm to the environment and health. In addition, the angle iron flange has good durability, long service time and simple maintenance. TDF Duct And Angle Duct

مزايا قناة شفة مشتركة

  • في إنتاج مجاري الهواء ذات شفة اللوحة المشتركة ، المواد الخام المستخدمة هي ألواح فولاذية مجلفنة. في المعالجة ، غالبًا ما يتم استخدام آلة شفة اللوحة المشتركة وخط إنتاج مجاري الهواء ، التي تقوم بمعالجتها وتشكيلها مباشرة ، وذلك لتحسين متانتها. بالنسبة للإنتاج ، من الأفضل اعتماد وضع الإنتاج الآلي والميكانيكي بالكامل ، مثل خطوط الإنتاج الخمسة لمجاري الهواء. بهذه الطريقة ، تكون سرعة الإنتاج سريعة نسبيًا ، وحجم المعالجة دقيق نسبيًا ، وكفاءة المعالجة عالية أيضًا ، وغالبًا ما تتم معالجتها مؤقتًا في موقع البناء.
  • The common flange air duct pays attention to high efficiency, and the most important sealing is not poor. There is often no air leakage in use. During installation, you only need to use the buckle made by the common plate flange machine to fasten. Which is particularly convenient and time-saving, and the weight is relatively light. It is also convenient for installation. Which can not only improve the installation efficiency but also save a lot of installation costs. TDF Duct And Angle Duct
  • عند صنع مجرى الهواء شفة مشتركة. لن ينتج عنه الكثير من الغبار ، ولن يتسبب في تلوث ضوضاء ، ولن يضر بالبيئة والصحة.
  • In addition, the durability of the common flange air duct is also relatively good. The service time is still long, and the maintenance is relatively simple. TDF Duct And Angle Duct
تركيب مجاري الهواء

إنتاج وتركيب مجاري الهواء ذات الشفة المشتركة

العلاقة بين المجاري الهواء ذات الألواح المشتركة uses the flange buckle produced by the common plate flange machine, which is made of slightly thicker galvanized steel plates. After being formed by the flange clamp forming machine, it is cut into a unified size for installation and connection. TDF Duct And Angle Duct

The manufacturing steps of the common flange air duct are divided into three steps. In the first step, the standard straight pipe is directly pressed into an integral flange from the air duct production line. For the second step, after blanking of non-standard straight pipe, elbow, tee, cross, and accessories, TDF flange forming is completed on a single piece of equipment. In the third step, the four right angles of the common plate flange are directly stamped by the die and can be clamped at the four corners during installation. TDF Duct And Angle Duct

Because the common plate flange is integrated with the pipe steel plate, it is not necessary to punch and rivet like an angle steel flange. A special flange clamp is used for the connection of two pipes, and the four corners plus a 90-degree flange angle are connected with bolts. It has the advantages of simple operation, improved efficiency, flat and smooth appearance, accurate size, strong interchangeability, and stable product quality. TDF Duct And Angle Duct

The production equipment of the common plate flange air duct is mainly around the common plate flange machine, and other equipment can be equipped with some blanking machines and equipment for folding the ventilation duct. TDF Duct And Angle Duct

آلة شفة TDF

إنتاج وتركيب مجاري الهواء ذات الزاوية الحديدية

يمكن تقسيم خطوات التصنيع لمجاري الهواء ذات الحافة الفولاذية الزاوية إلى أربع خطوات. الخطوة الأولى هي مادة الحديد ذات الزاوية السفلية ومواد مجاري الهواء السفلية. الخطوة الثانية هي لكمة زاوية الحديد. الخطوة الثالثة هي لحام الحديد الزاوي. الخطوة 4: حفر فتحات المسامير وبرشام مجرى الهواء وزاوية الحديد.

شفة الحديد الزاوية المصنوعة من خلال العملية المذكورة أعلاه لا تزال تواجه مشكلة قابلية التبادل الضعيفة. تشمل الظواهر: سطح الفلنجة غير مستوٍ ، ولا تتطابق الحافة المستطيلة مع ثقب المسمار ذي الحافة من نفس المواصفات بعد الدوران 180 درجة ، والبعد الداخلي أو أبعاد القطرين غير متساويين ، وتجاوز الانحراف المسموح به ، إلخ. . ، مما يؤثر على التجميع الطبيعي لمكونات مجاري الهواء في موقع البناء. التعديل والحفر غير الضروريين أثناء التثبيت بسبب الانحراف الصغير ؛ يؤدي الانحراف المفرط إلى إعادة العمل والهدر.

إن معدات الإنتاج لمجاري الهواء ذات شفة الحديد الزاوية تدور بشكل أساسي حول آلة العض متعددة الوظائف وآلات ومعدات القطع الأخرى لطي قناة التهوية.

PITTSBURGH قفل سابق

في الوقت الحاضر ، لإنتاج مجاري التهوية ذات شفة اللوح المشتركة وقناة تهوية شفة الحديد الزاوية ، مع الأخذ في الاعتبار تحسين الكفاءة وكفاءة العمل ، معدات إنتاج مجاري الهواء ذات خمسة خطوط بما في ذلك آلة الربط المزدوجة آلة الربط وآلة شفة اللوح المشترك ذات الوصلة المزدوجة للآلة وقد تم تطويرها.

يتميز خط إنتاج مجاري الهواء الخامس بمزايا احتلال الأرض المدمج ودرجة عالية من الإنتاج التلقائي. من الضروري فقط توفير مادة الملف ذات السماكة المقابلة وإرسالها إلى مكان التغذية لخط الإنتاج لإنتاج اللوح المسطح المطلوب أو قطع الغيار على شكل حرف L أو الأنبوب المربّع الكامل لقناة هواء شفة لوحة مشتركة وقناة هواء شفة حديدية بزاوية .

نظرًا للدرجة العالية من الأتمتة والتكوين المتقدم ومعدل الفشل المنخفض ، الآن في صناعة إنتاج مجاري التهوية ، أصبح الاعتماد على الخطوط الخمسة لإنتاج قنوات التهوية الأوتوماتيكية بالكامل أعلى وأعلى. يمكن أن يصل متوسط الطاقة الإنتاجية لنوبة واحدة إلى 2000 متر مربع لكل وردية ، مما يعني أنه لم يعد من الضروري اختيار ودمج آلات مختلفة لإنتاج مجاري الهواء. الآن يمكن لآلة واحدة تشكيل مجاري الهواء في وقت واحد ، وقد تم تحسين الكفاءة بشكل كبير.

خط مجرى الهواء 5

باختصار ، بغض النظر عن كيفية عمل مجرى التهوية. لن يؤثر اختيار مجرى TDF أو مجرى شفة الحديد الزاوية على التحسين التدريجي للمتطلبات الصناعية لمجاري التهوية. سواء كانت الجودة أو الخصائص المختلفة ، مثل العزل الحراري ، ومقاومة الهواء ، وما إلى ذلك. أو سيكون لتكنولوجيا معالجة مجرى التهوية متطلبات أعلى.

بالنسبة لمجاري الهواء ذات الألواح المشتركة وقناة الهواء ذات الزاوية الحديدية. يتمثل الاختلاف الأكبر في تحسين الكفاءة ، واختيار طريقة المعالجة المناسبة هو الطريقة الوحيدة لتحسين الكفاءة.

2 أفكار حول "الفرق بين قناة TDF وقناة الزاوية"

  1. Avatar of Meppo Solan يقول ميبو سولان:

    هل لي أن أسأل كيف يمكنني عمل مجرى هواء فولاذي بزاوية ، وما هي الآلات التي يجب أخذها في الاعتبار ، يرجى المساعدة في سردها. شكرا!

    1. الصورة الرمزية لسيمون يقول سيمون:

      مرحبا Meppo ،
      يجب أن تحتاج آلات تصنيع مجاري الهواء ذات الزاوية الفولاذية إلى الأنواع التالية: خط مجاري الهواء 3 ، آلة تشكيل القفل في بيتسبرغ ، خط إنتاج الحديد الزاوي ، آلة الطي اليدوية أو الهوائية.
      إن أمكن ، أقترح آلة خط مجرى الهواء 5 لصنع مجرى الهواء في خطوة واحدة. آمل أن تساعدك هذه الرسالة.

اترك تعليقا

لن يتم نشر عنوان بريدك الإلكتروني. البرتغالية الإلزامية مشار إليها بـ *